 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 379-1 PoE Transformer For Maxim MAX5941B PoE Interface/PWM Controller * Designed for forward topology * Operates at 275 kHz, at a 50% duty cycle Core material Ferrite Terminations RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 5.6 g Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 200 per 13 reel Plastic tape: 44 mm wide, 0.35 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth PCB washing Only pure water or alcohol recommended Part number1 B0863-BL_ Inductance2 min (H) 165 DCR max3 (Ohms) 0.061 (pri) 1.00 (reset) 1.29 (bias) 0.020 (drive) 0.008 (sec) Leakage inductance4 max (H) 0.75 Input voltage range (V) 28 - 60 Turns ratio5 pri : sec 1 : 0.29 pri : reset 1 : 1 pri : drive 1 : 0.24 pri : bias 1 : 1.3 1 Primary Isolation6 1500 Vrms Output7 3.3 V, 4 A 1. When ordering, please specify a packaging code: B0863-BLD Packaging: D = 13 machine ready reel. EIA-481 embossed plastic tape (200 per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance is for the primary, measured at 10 kHz, 0.1 Vrms, 0 Adc. 3. DCR for the secondary is measured with the windings connected in parallel. 4. Leakage inductance is for the primary and is measured with all other windings shorted. 5. Turns ratio is with the secondary windings connected in parallel. 6. Isolation is measured from the primary, reset and bias windings to the secondary and drive windings. 7. Output is with the secondary windings connected in parallel. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 12 11 Secondary 3 2 Reset 4 5 Bias 6 10 9 8 Drive 7 Secondary windings to be connected in parallel on PC board. Specifications subject to change without notice. Please check our website for latest information. Document 379-1 Revised 10/28/08 (c) Coilcraft, Inc. 2009 Document 379-2 PoE Transformer for Maxim MAX5941B Dot indicates pin 1 1 12 B0863-B 0.677 max 17,20 6 7 0.865 max 21,97 0.340 max 8,64 0.004 /0,10 0.079 2,01 0.693 17.60 0.590 14,98 6 7 0.028 0,72 0.135 3,43 1 0.665 16,88 0.07 1,79 Recommended Land Pattern 1 12 0.098 2,5 0.098 2,5 Dimensions are in inches mm Specifications subject to change without notice. Please check our website for latest information. Document 379-2 Revised 10/28/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of B0863-BL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |